Adopting high-speed 32-bit processor, all using optocoupler isolation to directly connect switches and motor drivers, with relay output interface to directly drive high-power equipment such as warning lights and buzzers, with power supply and input/output signal indicator lights, providing project example programs, schematic diagrams, industrial grade controllers, and strong anti-interference ability!
1. 1 power input port (10-30V);
2. One output port for 24V, 3.3V, and 5V power supplies (maximum current 2A, convenient for supplying power to external devices);
3. 1 SWD program burning interface (including one download cable and driver program, which can be downloaded directly after installation);
4. 14 switch input ports (all internally isolated by optocouplers, of which 4 are high-speed input ports for convenient collection of high-speed pulses and PID closed-loop control);
5. 4 analog input ports (collection voltage: 0-3.3V, if collecting high voltage, a series resistor is required);
6. 8-bit magnetic navigation 10 pin seat input port with 2 channels, which can be directly connected to and powered by 8-bit magnetic navigation sensors;
7. 16 bit magnetic navigation 20pin seat input port with 1 channel, which can be directly connected to and powered by 16 bit magnetic navigation sensors;
8. 16 switch output ports (all internally isolated by optocouplers, of which 4 are high-speed output ports, convenient for providing high-speed pulse output and achieving motor PWM speed regulation);
9. 10 relay output ports (allowing a maximum current of 1A), each with a separate COM port, can achieve high-power equipment control and drive;
10. 3-way RS232 interface, each with separate positive and negative pole outputs for convenient direct power supply to the sensor;
11. Two RS485 interfaces, each with a separate positive and negative pole output, facilitate direct power supply to the sensor;
12. 1 CAN interface, each with a separate positive and negative pole output for convenient direct power supply to the sensor;
13. 3 power indicator lights (+24V,+5V,+3.3V), 16 sensor signal indicator lights, 14 input signal indicator lights, 16 output signal indicator lights, and 10 relay output signal indicator lights;
14. Overall size: 205 * 135 * 50MM; Fixed hole size: 190 * 70MM; Aperture: 7.5MM;
15. Main chip: STM32F407VET6;
